Often I use a USB microphone for quick Voice Overs (for timing) and when I'm on the road I tend to just hook up my Zoom H4N to the laptop and record comments and VO's using it directly into FCP or Quicktime 7.
If you hold down Option while clicking on the volume adjustment menubar item you'll see this:
Instead of the normal volume slider. This is a quick way to access these common settings and get to the the Sound Preferences.
Bonus Tip:
Hitting Option + Volume Up or Down will also take you directly to the Sound panel in Settings.
Showing posts with label usb. Show all posts
Showing posts with label usb. Show all posts
Tuesday, April 10, 2012
Sunday, June 19, 2011
MacBook Pro 2011 Not Recognizing SanDisk Class 10 SD Cards
A few people are reporting that a Class 10 SanDisk SD Card won't be reliably recognized in a 2011 MacBook Pro.
What does seem to work as a temporary workaround is restarting the Mac with the card already inserted. But even then it's not recognized if you remove the card and then reinsert it or another similar card.
"I use a Sandisk SDHC Extreme Class 10 SD Card and have problems getting it to read through the inbuild SD card reader.
I tried the following:
Reformatting on Disk Utility
Reformatting on my Canon 450D
Restarting Laptop
Resetting PRAM
Resetting SMC
Repairing Disk Permissions
Repairing Disk
All of these did not solve my problem. I have a card reader which when plugged into the MBP, works fine and detects the card.
The Weird Part
I plugged the card into a friend's iMac and it detects it every time. And then right after I do that, I plug it into my MBP, and it detects the card, but the problem is once I eject it, and slot it back in, it fails to detect again! However if I try this method again (Slot to iMac, remove, slot back to MBP), it will fail the second time. "
Someone tried a card in MacBooks at an Apple store and:
"They had me EFFA back the machine, and provided me with a new one. I tested the new one right out of the box and it worked fine, but after Migration, it no longer worked. Restoring using the included disk back to factory specs DID NOT restore the ability to read the card.
In checking random machines at the apple store, only 1 on the entire floor recognized that a card was inserted, when I tried the Sandisk SDHC Extreme Pro 8GB 45MB/S card."
Apparently Apple and SanDisk are aware of the problem but if you use SD Cards for production or have them sent to you for editing it's a good idea to be aware of this issue. I've not seen it as I've been using an external USB card reader. Hopefully it'll be addressed soon with a software update.
What does seem to work as a temporary workaround is restarting the Mac with the card already inserted. But even then it's not recognized if you remove the card and then reinsert it or another similar card.
"I use a Sandisk SDHC Extreme Class 10 SD Card and have problems getting it to read through the inbuild SD card reader.
I tried the following:
Reformatting on Disk Utility
Reformatting on my Canon 450D
Restarting Laptop
Resetting PRAM
Resetting SMC
Repairing Disk Permissions
Repairing Disk
All of these did not solve my problem. I have a card reader which when plugged into the MBP, works fine and detects the card.
The Weird Part
I plugged the card into a friend's iMac and it detects it every time. And then right after I do that, I plug it into my MBP, and it detects the card, but the problem is once I eject it, and slot it back in, it fails to detect again! However if I try this method again (Slot to iMac, remove, slot back to MBP), it will fail the second time. "
Someone tried a card in MacBooks at an Apple store and:
"They had me EFFA back the machine, and provided me with a new one. I tested the new one right out of the box and it worked fine, but after Migration, it no longer worked. Restoring using the included disk back to factory specs DID NOT restore the ability to read the card.
In checking random machines at the apple store, only 1 on the entire floor recognized that a card was inserted, when I tried the Sandisk SDHC Extreme Pro 8GB 45MB/S card."
Apparently Apple and SanDisk are aware of the problem but if you use SD Cards for production or have them sent to you for editing it's a good idea to be aware of this issue. I've not seen it as I've been using an external USB card reader. Hopefully it'll be addressed soon with a software update.
Wednesday, March 16, 2011
Using A Zoom H4n To Record Directly Into Final Cut Pro
You probably already have or at least know about Zoom's H4n. It shows up on lots of indie films and industrials now days. I have one I love and use pretty often for VOs.
A friend was surprised when I showed them how you can use the H4n to record directly into Final Cut Pro using the (Option + 0) -that's a zero- Voice Over tool.
1. Set up Final Cut so you're ready to record the VO.
2. Plug in the H4n using a USB cable.
3. THEN turn it on. (you can plug in the USB cable and select it after, but it's likely your H4n is off to begin with)
Note: the H4n may turn on automatically when you plug in the USB cable. There's an issue here that you may run into and should be aware of: if you hear a whine noise or some how unclean audio try plugging the H4n into it's AC power THEN turn it on, THEN plug in the USB cable and then go to Menu > Audio I/F > Connect. Don't forget to select your Frequency if you need to.
4. Select "Audio I/F"
4. Choose your kHz.
5. Select "Connect".
6. In FCP hit Option + 0 to open the VO Tool window.
7. Under "Source" select "H4".
8. In your TimeLine set an In and Out point for the VO
(NO you don't need to lay video slugs down to record VO…although that works as well, my friend's method, btw)
9. Hit record in the VO Tool window.
BONUS TIP:
If you want to use your H4n to record directly into Audacity, say on a laptop that can't run FCP or something, you need to first go to Audacity's preferences and go to Devices > Recording > Device then select "H4" there then hit Ok.
You can also select the H4n as a playback device if needed, routing audio from the Mac to the H4n.
A friend was surprised when I showed them how you can use the H4n to record directly into Final Cut Pro using the (Option + 0) -that's a zero- Voice Over tool.
1. Set up Final Cut so you're ready to record the VO.
2. Plug in the H4n using a USB cable.
3. THEN turn it on. (you can plug in the USB cable and select it after, but it's likely your H4n is off to begin with)
Note: the H4n may turn on automatically when you plug in the USB cable. There's an issue here that you may run into and should be aware of: if you hear a whine noise or some how unclean audio try plugging the H4n into it's AC power THEN turn it on, THEN plug in the USB cable and then go to Menu > Audio I/F > Connect. Don't forget to select your Frequency if you need to.
4. Select "Audio I/F"
4. Choose your kHz.
5. Select "Connect".
6. In FCP hit Option + 0 to open the VO Tool window.
7. Under "Source" select "H4".
8. In your TimeLine set an In and Out point for the VO
(NO you don't need to lay video slugs down to record VO…although that works as well, my friend's method, btw)
9. Hit record in the VO Tool window.
BONUS TIP:
If you want to use your H4n to record directly into Audacity, say on a laptop that can't run FCP or something, you need to first go to Audacity's preferences and go to Devices > Recording > Device then select "H4" there then hit Ok.
You can also select the H4n as a playback device if needed, routing audio from the Mac to the H4n.
Labels:
audio,
keyboard command,
usb,
voice overs,
zoom h4n
Monday, November 17, 2008
Firewire is dead
The new spec will support data transfers at 4.8 gigabits per second, or Gbps, nearly 10 times faster than the current standard's 480 megabits per second and six times faster than FireWire 800. It's also 400 times faster than the 12 Mbps offered by the original spec, USB 1.0.
Firewire is dead.
Subscribe to:
Posts (Atom)

